Fuel Pump RV Generator Generac Kohler Onan Yanmar Gas Diesel 4-7 PSI 12V MD7781

Description

BBS
Electronic Fuel Pump
Profesional Grade Plus
Top Quality Best Warranty
100% Factory tested and approved
UL approved And Certified
for quality, safety and performance
O.E. Fit and form Assurance
Brand new
Universal Electric Low Pressure Fuel Pump or fuel transfer pump
For Generators RV or APU Gas or Diesel
For Onan, Kohler and Generac Generators
Description
12 Volt 4-7 PSI Flow up to 25-35
GPH
Output.
Pump is self priming
Please note you may need a fuel regulator depending on fuel requirements. Please check before ordering.
Replaces
Onan
149-2620, A029F887, A029F893, A029F891, 149-2331,
149-2140, 149-2163, 149-2036, 149-2145
Replaces
Kohler
249862, 278490, 277818, GM39462
and 55-25-559-01-5
Fits
Kohler Popular RV Models
Model 4.5CKM (Engine Model: Kohler KT17) (Spec Number Range 10111A through 10131A)
Model 4.5CKM Power Boost (TM) (Engine: KT) (Spec Number range 10151 Through 10185)
Model 4CKM and 5CKM and 4/5 CKFM (Spec Number Range 101203 Through 101360
Kohler Popular Marine Models
Model 5E, 4EF, 7.3E, 6EF, 5ECD, 7.3ECD, 6EFCD (Engine: Kawasaki, FD501D
Model 3.5/5 CFZ and 4/6.5CZ (Engine Honda G360) (Spec Number Range 125201-12523)
Model 3.5/5 EFZ and 4/6.5 ESZ (Spec Number range 125237-125261)
Replaces
Generac
42700 (042700), 74939 (074939), 77663 (077663), 90475 (090475)
Exclusive
for our Ebay customers we include a rubber insulator/anti-vibration pad to mount under fuel pump. No other ebay sellers include this insulator.
Solid state reliability
: Proven on thousands of original equipment applications, no electrical contacts. No bearings or diaphragms to wear out or fatigue.
We use only solid copper winding's most others use inferior aluminum plated copper which won't last long.
Ours Lasts four to five times longer than many other electric fuel pumps.
Barbed Fittings, Clamps and fuel filter included.
Compatible with leaded, unleaded fuels and Diesel
Installation
Easy Two bolt installation, for best results mount pump close to fuel tank below liquid line,
hook up fuel lines and wire to a fused ignition switched wire and ground black wire and your done.
Before installing remove any contamination from Fuel tank,
Fuel lines and Carburetor before installing Pump.
Warranty
We give a 30 day money back warranty for unused, not installed pump and
a 90 day
defective pump exchange, buyer to pay all return shipping
Disclaimer: seller's liability will not exceed the purchase price of the item
Please read installation instructions and remove any contamination from Fuel tank, Fuel lines and Carburetor before installing Pump or this can damage the pump and void Warranty.
Included with each pump
Barbed fittings provided with our pumps are 5/16" OD
which are for 5/16" id hose.
Hose Clamps, 5/16" id short
hoses
and 5/16"od fuel filter
included.
Compatible with leaded and unleaded fuels.
Dimensions
Mounting base 3"x 1 1/2", Mounting holes 2 1/2" center to center,
Pump height 2 1/2", Width inlet to outlet 3" across,
Barbed fittings hose end 5/16"od x 1/8-27npt.
Please note:
If you need different size barbed fittings for your
application
they are available at most hardware and auto parts stores.
You will need to know ID hose size x male 1/8-27npt on the threaded
side
where it screws into the pump